double balanced mi x er ultra-broadband lo (ghz) 2.0-26.5 1.5-26.5 1.5-26.5 1.5-3.0 3.0-26.5 1.5- 4 .0 4 .0-18.0 18.0-26.5 1.5-26.5 1.5-26.5 1.5-26.5 rf (ghz) 2.0-26.5 1.5-26.5 1.5-26.5 1.5- 4 .0 4 .0-26.5 1.5-26.5 1.5-26.5 1.5-26.5 if (mhz) d c -500 d c -700 d c -1250 d c -1250 d c -1250 d c -1250 min 18 db 20 db 18 db 20 db typical 7 .5 db 8.5 db 9.5 db 25 db 30 db 5 db 25 db 35 db 23 db 35 db +3 dbm +12 dbm +9 dbm max 9.5 db 10.0 db 11.5 db conditions electrical specifications (1) : parameter ssb conversion loss: (2) (3) isolation l o to rf: lo to if: rf to if: input 1-db compression point: input third order intercept point: lo power: (4) model MM134XG-1 rf 1.5 to 26.5 ghz notes: 1. s pecifications are guaranteed when tested as a downconverter in a 50 ohm system at +2 5 c with the nominal lo powe r . s pecifications indicated as typical are not guaranteed. 2. noise figure is typically within 0.5 db of conversion loss for if frequencies greater than 10 mhz. 3. conversion loss typically degrades less than 0.5 db at +100 c and improves less than 0.5 db at -55 c. 4. usable lo drives are up to 2 db below and 3 db above nominal. t ypical p er f o r mance a t 25c drop-in module or w ith sma(f) connectors m = module p = with connectors all dimensions are in inches and [mm]. outline: g- .015d MM134XG-1 model MM134XG-1 rev c 5/20/10 specifications spectrum microwave 2144 franklin drive n.e. palm ba y , fl 32905 ph (888) 553-7531 fax (888) 553-753 2 spectrum microwave 2707 black lake place philadelphia, pa 19154 ph (215) 464-4000 fax (215) 464-4001 ww w .spectrummicrowave.co m third lo harmonic conversion loss: (2) (3) 6.0-20.0 6.0-20.0 6.0-20.0 20.0-26.5 2.0-6.5 2.0-6.5 2.0-6.5 6.5-9.0 d c -500 d c -700 d c -1250 d c -1250 17.5 db 18.5 db 19.5 db 30.0 db 22 db 23 db 24 db 33 db
|
